trusted by 270,000+ prescription glasses customers
Your Welcome Code is
Eyeglasses
Best choice for daily life
Balance individuality with comfort
Match with large lens size
Unique frame shape
Black Friday
Lenses
Featured
| Size | Frame Width(mm) |
| Small | S (120-129mm) |
| Medium | M (130-139mm) |
| Large | L (140-149mm) |
| Extra Large | XL (150-Above) |
We suggest you measure your frame dimensions to make sure your new glasses correctly fit your face.
Frame Width
Frame Width is the measurement horizontally across the back of the frame.
Lens Width
Lens Width is the horizontal width of each lens at its widest point.
Lens Height
Lens Height is the vertical distance of the lens at its tallest point. If you want to order progressive, the lens height of the frame should be at least 30mm.
Bridge Width
Bridge Width is the shortest distance (in millimeters) between your two lenses.
Temple Length
Temple Length is the length of the temple to its temple tip, including the bend that sits on your ear.
Due to the different measurements methods, the measurements printed on the inside of the temple arm may vary from those showing on our website.
Rate This Frame
PRODUCT DESCRIPTION
Recommended from customers
Single Vision Prescription
If your prescription is like the following one, you need first to choose single vision type, and then fill in the correct information like the example below.
Single Vision Prescription With Prism
If your single vision prescription is like the following one, you also need to fill in the prism information besides all other information like the example below. (Note: there is no PD value in the prescription, but you need to fill in your PD value)
Progressive Prescription
If your prescription is like the following ones, you need to fill in information like the example below. (Note: there is no PD value in the prescription, but you need to fill in your PD value)
Sample 1, you just need to fill in the corresponding values.
Sample 2, you need to change +225 to +2.25, -150 to -1.50, -125 to -1.25, -50 to -0.50, and then fill in the corresponding values.
Sample 3, you need to use Near O.D. +0.75-Distance O.D.-1.50 or use Near O.S.+1.00- Distance O.S. -1.25 to get the ADD +2.25 value and then fill in the ADD blank
PS: the three different prescriptions get the same prescription lenses.
Sample 2
Sample 3
Reading Prescription
If your prescription is like the following ones, you need to fill in information like the example below. (Note: there is no PD value in the prescription, but you need to fill in your PD value)
Other Information You Might Use When Filling In Prescription
OD stands for “oculus dexter,” or right eye.
OS stands for “oculus sinister,” or left eye.
if there is PL or DS in your prescription, it means the value should be 0.
The term PL (Plano) means there is no spherical correction in this eye.
DS stands for “diopter sphere”, which means there is no astigmatism correction for this eye.
You need to fill in information like the example below. (Note: there isn’t PD in the prescription, but you need fill in your PD measurement)
Enter Your PrescriptionHow to fill your Rx
Anti-Scratch
Anti-Reflective
Updated Hard Coating
Anti-scratch
Anti-reflective
Updated Hard Coating
Anti-scratch
Anti-reflective
Updated Hard Coating
Enhanced comfort and definition
UV-protective
Impact-resistant
Anti-scratch
Anti-reflective
Updated Hard Coating
Thinner than 1.61 Mid-index
UV-protective
Impact-resistant
Anti-scratch
Anti-reflective
Updated Hard Coating
Thinner than 1.67 Mid-index
UV-protective
Impact-resistant
Anti-scratch
Anti-reflective
Updated Hard Coating
Thinner than 1.71 Mid-index
UV-protective
Impact-resistant
